Silirub N is a neutral cure, fully elastic one component joint sealant based on silicones.
- Very easy application
- Permanent colour, UV-resistant
- Stays permanently elastic after curing
- Very good adhesion on many materials
- Low modulus
Teak silicone sealant
Building- and construction joints
Top sealing at glazing jobs
Expansion joints between various building materials
Sealing between treated wood and glass
Sealing between PVC and glass
Directions for use
Method: manual or pneumatic caulking gun
Application temperature: +5°C to +35°C
Surface temperature: +5°C to +35°C
Clean: with white spirit immediately after use
Finish: with soapy water or Soudal Smoothening Liquid before skinning
Repair: with the same material
If the joint is smoothened with a soapy solution of smoothening liquid, ensure that the surface is not in contact with this liquid as this could impair the bond. We recommend working with a smoothening tool.
This sealant should not be used to install double glazed windows and security glass – use Silirub PV or Silirub 2 instead.
Do not use on natural stones (marble, granite,…) – use Silirub MA instead
Because of the diversity of aluminium and PVC surfaces we recommend a preliminary adhesion test.
In a dark room the sealant may discolor. Exposure to sunlight will solve this problem
TEAK SILICONE SEALANT.